to select a new car.
Fuel needs to be transferred from the gas tank to the engine where it can burn and provide power to the car. Gas from the tank goes to the engine by passing through the fuel injector. The fuel injector converts the liquid gas to a fine mist (spray) so that it can burn easily.
The number of injectors is the same as the number of cylinders in an engine. (For example, a four cylinder engine will have four fuel injectors.) Gas is delivered from the fuel pump through the fuel rail and is directed to the fuel injectors.
Your mechanic will install a new fuel filter (unless the fuel filter is inside the fuel pump) and replace the upper intake manifold gasket if applicable. Both are recommended during this service.
You should follow the manufacture maintenance schedule and get the fuel injectors flushed on a regular basis. This keeps the fuel injectors clean and will ensure a good spray pattern into the cylinders.
Your fuel injectors transfer gas from the gas tank into the engine cylinders. Gas enters the fuel injectors in a liquid form, and is converted into a mist, which is then sprayed into the cylinder so that it can burn quickly and efficiently. If one of your fuel injectors is damaged, it will not be able to carry out this function, and your vehicle will operate without the power of that cylinder. When one cylinder is not powered, your vehicle will not run smoothly, and may misfire. It will also likely have far worse gas mileage.
to select another service.
to add more service.
your mechanic in your pocket
Feel Free To Get In Touch With Us Via Phone Or Send Us A Message
+233 50 497 0929
© 2023 Uncle Fitter All rights reserved.