Cooling System Flush

What does Cooling System Flush entail

Your cooling system is what keeps your car from overheating. It works by circulating a mixture of water and coolant through the engine. Over time the coolant mixture becomes contaminated with scale and rust, which can clog and damage the cooling system components. A cooling system flush essentially flushes out the entire system of contaminants and replaces the coolant mixture with fresh coolant and water.

Keep in mind

  • Your mechanic will drain the fluid, clean the system with coolant cleaner, and use water to remove the remaining coolant. After cleaning the system, the mechanic will fill it up with new coolant. This process is effective and an approved industry method of flushing your vehicle’s cooling system.

What are the common symptoms indicating you need a Cooling System Flush

  • Check Engine warning light is on
  • Low Coolant warning light is on
  • Engine is overheating

How it's done

  • Install flush chemical to radiator
  • Bring the car to operating temperature
  • Drain the old coolant
  • Close valve and refill with water
  • Repeat the process
  • Fill radiator with a 50/50 mixture of coolant and water
  • Check for leaks and fan operation


How can we help?

Tell us what the problem is (e.g the car is not starting or I need new shock absorbers). What kind of car you drive and your contact information.

© 2020 Uncle Fitter All rights reserved.