While your ABS system requires electricity in order to operate, it relies on hydraulic pressure to activate the brakes (as does your regular braking system). Because an ABS system has more intensive fluid needs, such as sending additional fluid to the accumulator for use during actual ABS operation, there needs to be a way to ensure that fluid levels are constantly monitored. This is done by the anti-lock brake (ABS) fluid level sensor, or brake fluid level sensor, if you prefer. The fluid level sensor is exactly what it sounds like. It’s an electronic sensor generally installed in the body of the master cylinder with just one job – to keep an eye on the level of fluid in the reservoir. It is an electrical switch that determines if the fluid is low by a change in electrical resistance. If the fluid level drops below a safe limit, the sensor sends a signal to the computer, which then turns on the ABS light in your dash (and disables ABS).
The brake fluid level sensor monitors the level of fluid in the reservoir, and then communicates that information to the brake system computer. The computer determines if the level is safe for operation, and if not, turns the ABS warning light in your dash on, and then disables the ABS system to prevent potential damage. If your ABS light is on, we recommend having the problem diagnosed by one of our expert mechanics immediately.
Without a functioning brake fluid level sensor, your braking computer will be unable to determine whether there is enough fluid in the system for safe operation, and will disable the ABS while turning on the brake warning indicator. You may not be able to stop your vehicle in a controlled fashion or you may lock up the brakes on slippery surfaces, potentially causing an accident. Have the anti-lock ABS fluid level sensor replaced if it is faulty.
Tell us what the problem is (e.g the car is not starting or I need new shock absorbers). What kind of car you drive and your contact information.
© 2023 Uncle Fitter All rights reserved.